Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Xiaomi Roborock 1C Replacement Battery 14.4V 2500mAh

Up to 19% off
New arrival
Sale priceFrom $61.99 USD Regular price $76.99
Shipping calculated at checkout.
Fits Xiaomi Roborock 1C with OEM part number P1904-4S1P-MM replacement.
14.4V 2500mAh capacity restores motor draw and autonomous cleaning cycles on this cordless vacuum.
Connector slides into the battery slot with a single locking tab; orientation is keyed.
Bench testing on the Roborock 1C showed the BMS accepted full charge cycles without cutoff delay.
Do not leave this battery on the charging dock continuously — trickle charge degrades capacity faster than removing it when full.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.4V

Amp

2500mAh

Xiaomi Roborock 1C — 14.4V Li-ion Replacement Battery (P1904-4S1P-MM)

This is a 14.4V 2500mAh Li-ion battery for the Xiaomi Roborock 1C robotic vacuum cleaner. It fits the STYTJ01ZHM, SKV4093GL, and XM2000021 chassis. The OEM part number is P1904-4S1P-MM — verify this against the label on your original cell before ordering.

  • Roborock 1C platform fit: The 1C, SKV4093GL, STYTJ01ZHM, and XM2000021 all run the same 14.4V four-cell pack with an identical connector and BMS handshake. Swapping between these variants requires no modification.
  • Bench tested on actual hardware: We ran this pack through full charge and discharge cycles on the 1C platform. The BMS communicated correctly with the dock charger, accepted charge without fault codes, and the motor controller recognised state-of-charge data normally.
  • Dock charging discipline on robotic vacuums: Do not leave the Roborock 1C on the charging dock permanently. Continuous trickle charging accelerates capacity fade on Li-ion packs faster than normal cycling does. Charge to full, then remove from the dock until the next cleaning run.

Suction dropping before the battery indicator reaches low

This happens when the motor draws more current than the pack can sustain at its present state of health. A partially blocked filter forces the motor to work harder, pulling sustained high current that causes voltage to sag below the controller's threshold. The 1C interprets this as a low-cell-voltage event and reduces motor speed before the indicator shows empty. Clean the filter first — if suction still drops early with a fresh filter, the pack has degraded and needs replacing.

Motor cuts out mid-run then recovers after a short pause

This is a BMS overcurrent trip, not a charge level issue. When suction is restricted — blocked brush roll, clogged filter, or hair wrapped around the intake — the motor draws a sustained current spike that triggers the BMS protection circuit. The pack shuts output, cools briefly, then resets. Clear the blockage and check that the filter is seated correctly. If trips continue on an unblocked machine, measure pack voltage at rest: a healthy cell should read at least 16.0V fully charged.

Compatible Models

Roborock 1C SKV4093GL XM2000021 STYTJ01ZHM Dreame MC1808

Replaces Part Numbers

P1904-4S1P-MM

Technical Specifications

Voltage14.4V
Amp Hours2500mAh
Capacity2500mAh
Rate36Wh
Net Weight269g /9.49 oz
Gross Weight449g /15.84 oz
Approximate Weight449g /15.84 oz
Dimension 138.40 x 48.10 x 42.50mm

Product Highlights

  • Brand: Xiaomi
  • Manufacturer: CS
  • Series: Standard
  • Color: White
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Roborock 1C stops mid-clean, sits for a minute, then starts again — is that the battery failing?

That pause-and-recover pattern is a BMS overcurrent trip, not a dead cell. The battery's protection circuit cuts output when the motor draws a sustained current spike — usually caused by a blocked filter, tangled brush roll, or restricted intake forcing the motor to overwork. Clean the filter and clear the brush roll first. If the trips continue on an unblocked machine with a fresh filter, the pack has degraded and is no longer holding voltage under load — replace it.

The replacement battery won't charge on the dock — the indicator just flashes and stops.

The Roborock 1C dock charger expects a BMS handshake from the pack before it begins a charge cycle. If the BMS in the replacement cell doesn't respond correctly, the charger faults out and stops. Confirm the part number on the replacement matches P1904-4S1P-MM exactly. If it matches, seat the battery firmly, power-cycle the dock by unplugging it for 30 seconds, then re-dock — this resets the charger's fault latch and allows a fresh handshake attempt.

The 1C used to clean the whole apartment on one charge — now it barely gets through one room. Nothing is blocked.

Capacity fade from continuous dock charging is the most common cause when the vacuum has been left on the dock between every run. Li-ion cells on permanent trickle charge degrade faster than cells that are cycled fully. A new pack restores rated capacity, but the habit needs to change too — charge to full, remove from the dock, and only re-dock when the battery is depleted. If the new pack also fades quickly within a few months, check that the dock power adapter output is within spec: it should deliver 20V DC.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.