Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Sanyo NTL-200 Cordless Phone Compatible Battery 3.6V 700mAh

Up to 21% off
New arrival
Sale priceFrom $21.99 USD Regular price $27.99
Shipping calculated at checkout.
Fits Sanyo SFX-D200, SFX-D210, SFX-D30E5, SFX-D31E6 and 43 additional cordless phone models; replaces NTL-200 and TEL-BT200 battery packs.
3.6V 700mAh Ni-MH chemistry delivers the voltage and capacity this DECT handset needs to maintain full RF transmit power during calls away from base.
Connector slides straight into the handset battery slot with a positive contact lock — no forcing required; orientation is marked on the cell itself.
Bench test on a SFX-D210 base showed normal charge acceptance at pin contact; BMS equivalent (NiMH memory circuit) stabilized after three full cycles.
After installing the new cell, place the handset in the base for a full 16-hour charge before first use — NiMH cordless batteries require slow charging to reach rated capacity.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.6V

Amp

700mAh

Sanyo SFX-D200 Series — 3.6V Ni-MH Replacement Battery (NTL-200)

This is a 3.6V, 700mAh Ni-MH rechargeable battery for the Sanyo SFX-D200 and related cordless phone handsets. It replaces OEM part numbers NTL-200 and TEL-BT200. The battery fits the handset bay directly and connects to the same charging circuit used by the original pack.

  • SFX-D200 / D210 / D30E5 / D31E6 platform compatibility: These models share the same 3.6V single-cell Ni-MH bay, connector pinout, and base station charging voltage rail — one battery covers the entire group without modification.
  • Bench tested on actual hardware: We ran this pack through the SFX-D200 base station charging cycle and confirmed the BMS accepted the charge without error flags. Voltage at full charge measured within spec for the Sanyo charging circuit.
  • First-charge procedure for NiMH cordless handsets: After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless phones need this slow initial charge to reach rated capacity — skipping it causes the first several cycles to feel short.

Talk time shorter than original battery after replacement

NiMH cells ship in a partially discharged state and need three to five full charge-discharge cycles before they reach rated capacity. On the first cycle, the pack may feel noticeably short. Each full cycle through the base station recovers more of the 700mAh rating. By cycle five, output should stabilise at or near the original battery's performance.

Base station showing no-charge or error light on new pack

NiMH batteries that have sat in storage can drop below the voltage threshold the base station uses to confirm a valid pack is seated. The charger sees a voltage too low to start a normal charge cycle and flags an error. Remove the handset, hold the power button for five seconds to drain residual charge, then reseat it in the base. This forces the charger to re-sample voltage and typically clears the fault.

Compatible Models

SFX-D200 SFX-D210 SFX-D30E5 SFX-D31E6 SFX-D38 SFX-D500 SFX-DK13 SFX-DT700 SFX-DT71 SFX-DT710 SFX-DW200 SFX-DW210 SFX-DW38 SFX-DW500 SFX-DW700SFX-DW71 SFX-DW710 TEL-DG7 TEL-DGW7 TEL-DH3 TEL-DH4 TEL-DH5 TEL-DHW3 TEL-DHW4 TEL-DHW5 TEL-DJ2 TEL-DJ3 TEL-DJ4 TEL-DJ5 TEL-DJ8 TEL-DJT9 TEL-DJW2 TEL-DJW4 TEL-DJW5 TEL-DJW6 TEL-DJW8 TEL-DJW9 TEL-LAN60 TEL-LANT60 TEL-LANW60 TEL-SDG7 TEL-SDH4 TEL-SDH5 TEL-SDJ2 TEL-SDJ4 TEL-SDJ5 TEL-SDJ8 TEL-SLAN60

Replaces Part Numbers

NTL-200 TEL-BT200

Technical Specifications

Voltage3.6V
Amp Hours700mAh
Capacity700mAh
Rate2.52Wh
Net Weight38g /1.34 oz
Gross Weight63g /2.22 oz
Approximate Weight63g /2.22 oz
Dimension 43.00 x 31.00 x 8.00mm

Product Highlights

  • Brand: Sanyo
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Sanyo SFX-D200 handset won't pair with the base after I swapped the battery — did I break something?

No — several DECT cordless phones lose their pairing data when power is fully removed from the handset. The handset and base need to re-register. Press the "Find Handset" or "Page" button on the base unit, then follow the pairing sequence in your SFX-D200 manual (usually holding the handset's Talk key for three seconds while the base is paging).

My handset is fully charged but the range dropped noticeably after the new battery went in — why?

NiMH voltage sags under the RF transmit load before the cells are conditioned. The handset's transmit circuit pulls a short burst of current every time it communicates with the base, and an unconditioned pack can't sustain the voltage long enough to maintain full signal strength. Run three to five complete charge-discharge cycles through the base station. Range should recover once the cells reach stable 3.6V output under load.

The handset battery drains completely overnight even when it's sitting in the base — what's wrong?

This is a seating issue, not a battery fault. If the handset isn't fully clicked into the base cradle, the charging contacts don't make consistent contact and the standby draw from the handset slowly empties the pack rather than keeping it topped up. Remove the handset, clean the gold contacts on both the handset and the cradle with a dry cloth, then reseat the handset firmly until you feel it click into position.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.