Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Remington TF600 Replacement Battery 1.2V 2000mAh Ni-MH

Up to 21% off
New arrival
Sale priceFrom $21.99 USD Regular price $27.99
Shipping calculated at checkout.
Fits Remington TF600, TA3050, TA3070, TA4570 and 47 additional rotary shaver models; direct OEM replacement battery.
1.2V Ni-MH cell at 2000mAh delivers 2.4Wh to sustain motor torque through a full grooming session without mid-stroke power sag.
Cylindrical cell slides into the battery compartment with friction fit and indexing notch; no connector or locking tab — slides straight in.
We tested this cell on the TF600 bench unit; BMS accepted charge in dock mode, motor drew steady current through multiple cycles with no cutoff faults.
On first use after installation, run the shaver over a sink for the first two passes to let the motor load settle; Remington rotary heads draw peak current on engagement.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

1.2V

Amp

2000mAh

Remington TF600 / TA Series — 1.2V Ni-MH Replacement Battery

This is a 1.2V, 2000mAh Ni-MH replacement battery for the Remington TF600 electric shaver and related TA-series models. It slots directly into the shaver housing and powers the motor circuit that drives the cutting head. Capacity is 2.4Wh, matching the original specification.

  • TF600, TA3050, TA3070, TA4570 and more: These models share the same 1.2V motor rail, cell dimensions (50.00 × 14.80 × 14.50mm), and charge termination logic — the shaver's internal charge controller handles delta-V cutoff the same way across this range.
  • Bench tested on actual hardware: We ran charge and discharge cycles on this cell type to confirm the BMS accepts charge termination cleanly at full capacity and that the motor circuit draws expected current without voltage sag tripping early cutoff.
  • Charging port care before connecting: Dry the charging contacts and port completely after rinsing the shaver — moisture bridging the contacts can trigger a protection fault the device reports as a dead battery rather than a charging error.

Capacity fade from daily partial cycling on the TF600

Ni-MH cells in shavers degrade faster when partially cycled every day rather than run down properly before recharging. The shaver's delta-V charge termination circuit starts to misjudge full capacity because the cell voltage curve becomes compressed. This causes the indicator to show full charge while actual usable capacity is significantly lower. Running the shaver to cutoff before a full charge cycle helps recalibrate the voltage curve.

Motor speed drops before the low-battery indicator activates

This happens because Ni-MH voltage sags under motor load before it drops low enough to trigger the indicator threshold. The shaver's indicator is tied to resting cell voltage, not load voltage — so the motor slows noticeably while the indicator still shows charge remaining. A worn cell makes this gap wider. Replacing the cell restores the load voltage to a level that keeps motor speed consistent through most of the discharge cycle.

Compatible Models

TF600 TA3050 TA3070 TA4570 TA5570 R842 R845 R846 R850 R856 R851 R860 R870 R875 R890 R950 R960 R970 R-4130 R-5130 R-6130 R-7130 R-600 R-9100 R-9170 R-9190 R-9200 R-9250 R-9270 R-9290 R-9300 R-9350 R-9370 R-9500 R-TCT WDF-5000 MS-280 MS-290 MS-900 MS2-390 MS-5100 MS-5200 MS-5500 MS-5700 MS-5800 MS-6000 R-650s R-450s F-4790 F-5790 F-7790

Technical Specifications

Voltage1.2V
Amp Hours2000mAh
Capacity2000mAh
Rate2.4Wh
Net Weight28g /0.99 oz
Gross Weight53g /1.87 oz
Approximate Weight53g /1.87 oz
Dimension 50.00 x 14.80 x 14.50mm

Product Highlights

  • Brand: Remington
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Remington TF600 shaver cuts out or slows down well before the battery indicator says it's low — what's happening?

The battery indicator reads resting cell voltage, not the voltage under motor load. An aged Ni-MH cell sags under the current draw of the cutting motor, dropping speed or triggering cutoff before the indicator catches up. This gap widens as the cell degrades. Replacing the cell closes that gap — the motor should maintain consistent speed through most of the discharge cycle.

The shaver stopped charging after I rinsed it — it just flashes or shows dead. Is the battery gone?

Moisture bridging the charging contacts causes a BMS protection trip that the TF600 reports as a dead battery rather than a charging fault. Dry the contact pins and port thoroughly — a cotton swab in the contact recess helps — then leave it for 30 minutes before reconnecting to the charger. If the shaver still won't accept charge after a full dry-out, the cell itself may have discharged below the 0.9V recovery threshold and will need replacing.

The shaver feels noticeably warm after a few passes — is that normal or a sign the battery is failing?

Some warmth is normal — the motor and the Ni-MH cell both generate heat in a small housing during discharge. If the warmth has increased compared to when the shaver was new, that usually means the cell's internal resistance has risen with age. Higher internal resistance turns more energy into heat instead of motor output. A new cell at correct impedance will run cooler at the same load.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.