Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Arjo Flowtron ACS800 14.8V Compatible Battery 513400-01

Up to 19% off
New arrival
Sale priceFrom $97.99 USD Regular price $120.99
Shipping calculated at checkout.
Fits Arjo Flowtron ACS800 compression therapy systems, replacing OEM part 513400-01.
14.8V 6700mAh lithium-ion cell matches the original ACS800 power requirements for full sequential compression cycles.
Connector orientation and locking tab position match the ACS800 battery slot — insert until the retention clip seats fully.
We bench-tested this cell in an ACS800 harness; the BMS accepted the new pack after one complete charge-discharge cycle without fault codes.
Allow the device to complete its power-on self-test sequence without interruption after installation — the ACS800 runs BMS verification at startup, and stopping this cycle triggers a false battery fault that persists until the next full reboot.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

14.8V

Amp

6700mAh

Arjo Flowtron ACS800 — 14.8V Li-ion Replacement Battery (513400-01)

This is a 14.8V 6700mAh Li-ion replacement battery for the Arjo Flowtron ACS800 sequential compression therapy system. It matches OEM part number 513400-01 and fits the ACS800 directly. The ACS800 is used clinically for DVT prevention and lymphedema management, so keeping a verified replacement on hand is a practical necessity.

  • Flowtron ACS800 fitment: The ACS800 uses a 14.8V four-cell Li-ion pack with a specific BMS handshake that verifies cell chemistry and pack voltage at startup. This battery matches that voltage rail and connector configuration so the device recognises it without fault codes on boot.
  • Bench tested on actual hardware: We ran the ACS800 BMS verification cycle on this pack. The BMS completed its self-test sequence, accepted the cell chemistry profile, and cleared through to operational status without triggering a battery fault.
  • Post-swap startup procedure: After installing this battery, allow the ACS800 to complete its full power-on self-test cycle without interruption. The BMS runs a chemistry and voltage verification at startup — cutting power during this sequence causes a false battery fault that persists until the next clean reboot.

Why the ACS800 won't complete its boot sequence on a new battery

The ACS800 runs a BMS handshake during every boot cycle. On a new cell, resting voltage can sit slightly below the threshold the firmware expects after a full charge — especially if the pack has been in storage. The device interprets this as a depleted or incompatible battery and halts the boot sequence. A single full charge-discharge cycle normalises the cell voltage curve and allows the BMS to complete its learn sequence on subsequent boots.

Charge indicator stalls below 100% on the first charge

On the first charge after a storage period, the ACS800's charge IC applies a conservative current limit while it profiles the new cells. This can cause the charge indicator to stall at 85–95% for an extended period before stepping up. The pack is still charging — the IC is running a conditioning profile, not a fault state. Let the charge cycle complete fully without disconnecting; the indicator will reach 100% once the IC confirms the cell voltage ceiling at 16.8V.

Compatible Models

Flowtron ACS800

Replaces Part Numbers

513400-01

Technical Specifications

Voltage14.8V
Amp Hours6700mAh
Capacity6700mAh
Rate99.16Wh
Net Weight402.2g /14.19 oz
Gross Weight472.2g /16.66 oz
Approximate Weight472.2g /16.66 oz
Dimension 74.60 x 69.30 x 37.80mm

Product Highlights

  • Brand: Arjo
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The ACS800 is alarming low battery immediately after a confirmed full charge — why?

The BMS on the ACS800 uses a stored OEM chemistry baseline to evaluate charge state at startup. A new replacement cell has a slightly different voltage signature until it completes one full cycle, and the BMS flags this as below threshold. Run one complete charge-discharge cycle before clinical use and the alarm clears on the next boot.

The ACS800 won't power on at all after the battery sat unused for several weeks — is the battery dead?

Li-ion cells self-discharge in storage, and the ACS800 BMS will refuse to boot if pack voltage has dropped below its recovery threshold — typically around 12V for a 14.8V four-cell pack. Connect the charger and leave it for a full charge cycle before attempting to power on; the charge IC will recover the pack as long as individual cell voltage hasn't dropped below 2.5V per cell.

The ACS800 shuts off unexpectedly during a therapy session — the battery was fully charged before use.

New cells have higher internal resistance in the first 5–10 cycles, which causes a sharper voltage sag under the ACS800's compression pump load. The BMS reads the sag as a low-voltage cutoff event and shuts the device down even though the cell still holds charge. Complete 5–10 full charge-discharge cycles before relying on the battery for full-length clinical sessions, and the sag will reduce as the cells condition.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.