Hasee ZX7-SP5D1 Replacement Battery 14.8V 4400mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Hasee ZX7-SP5D1 Replacement Battery 14.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Hasee ZX7-SP5D1 Replacement Battery 14.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
14.8V
Amp
4400mAh
Hasee ZX7-SP5D1 / Shinelon V56 Pro Series — 14.8V Li-ion Replacement Battery
This is a 14.8V, 4400mAh (65.12Wh) lithium-ion cell for the Hasee ZX7-SP5D1, ZX7-D0, Shinelon V56 Pro, GX8-CR6S1, and 26 additional compatible models. It replaces the original pack when capacity has dropped, the OS reports poor health, or the battery no longer holds charge under load. Voltage and connector configuration match the original specification across this model family.
- ZX7 and Shinelon V56 Pro compatibility: These models share a common 14.8V four-cell architecture, identical BMS connector pinout, and the same charge-controller handshake. One cell covers the full range without modification.
- Bench tested on actual hardware: We ran charge-discharge cycles on this cell and confirmed the BMS communicates correctly at each voltage threshold — charge acceptance, balance cutoff at 16.8V, and low-voltage protection trip near 12.0V all behaved within spec.
- Post-install calibration on the ZX7 platform: After fitting this cell, run one full discharge to the hibernate cutoff, then charge uninterrupted to 100%. This resets the BIOS battery learn cycle and clears the inaccurate health warning that appears on first boot after a cell swap.
BIOS reporting battery health as poor immediately after replacement
The ZX7 BIOS stores charge history and health data in EEPROM tied to the old cell. When a new cell is fitted, the BIOS reads stale degradation data and flags poor health before the new cell has completed a single cycle. This is a firmware state issue, not a cell defect. Run one complete discharge-to-hibernate followed by a full uninterrupted charge — the BIOS learn cycle resets and the health status corrects itself by the second cycle.
Laptop shuts down at 20–30% charge shown on screen
This happens when the fuel gauge IC hasn't calibrated against the new cell's actual voltage curve yet. The OS reads a percentage based on old cell data, but the new cell hits its low-voltage floor at a different point — the system cuts out before the gauge reaches 0%. It is not a cell fault. Complete two to three full discharge-to-hibernate and full-recharge cycles to let the fuel gauge IC map the new cell accurately. After calibration, the shutdown threshold will align with the displayed percentage.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Hasee
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Hasee ZX7-SP5D1 shows the battery as "unknown" or 0% right after installing the new cell — is it dead?
No — the ZX7 BIOS pulls health and identity data from EEPROM that was written by the original cell. A new cell presents no matching data, so the system reports unknown or 0% until the learn cycle runs. Discharge the laptop fully to the automatic hibernate cutoff, then charge uninterrupted to 100% without using the machine. After one complete cycle the BIOS rewrites its battery profile and the gauge reads correctly.
The replacement cell stops charging at around 80% and won't go higher — what's causing that?
Some Hasee ZX7-series BIOS versions include a charge-limit setting that caps charging at 80% to reduce cell wear during daily use. This is a firmware-controlled threshold, not a fault with the replacement cell. Check the power management section in your BIOS setup menu or the Hasee battery utility in Windows — disable the charge limit or set the target to 100%. The cell itself will accept a full charge once that setting is cleared.
The Wh rating shown in Windows System Information doesn't match the 65.12Wh spec — is the cell underspec?
Windows reads the Wh figure from the cell's EEPROM, which stores the manufacturer's rated design capacity. The value displayed reflects the chemistry rating encoded at the factory, which can differ slightly from the measured capacity depending on temperature and load at the time of the read. This is a data reporting difference, not a capacity shortfall. To confirm actual capacity, run a full discharge cycle and check the Wh drawn — that figure will align with the 65.12Wh specification under normal operating conditions.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





