Schenker XMG U505 Replacement Battery 14.8V 4400mAh
This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Schenker XMG U505 Replacement Battery 14.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Schenker XMG U505 Replacement Battery 14.8V 4400mAh - is backordered and will ship as soon as it is back in stock.
Voltage
14.8V
Amp
4400mAh
Schenker XMG U505 / U705 Series — 14.8V Li-ion Replacement Battery
This is a 14.8V, 4400mAh (65.12Wh) Li-ion battery for the Schenker XMG U505, U705, U507, U706-1ab, and over 35 additional XMG variants. It replaces the original cell when the laptop no longer holds charge or fails to power on from battery. Voltage, connector, and BMS signalling match the original specification.
- XMG U500 and U700 series compatibility: These models share a 14.8V four-cell architecture, the same physical connector, and a common BMS communication protocol. A single replacement cell covers the full range without modification.
- Bench tested on actual hardware: We ran this cell through a full charge and discharge cycle on XMG U505 hardware. The BMS handshake completed correctly, charge accepted to capacity, and the protection circuit responded appropriately at low-voltage cutoff.
- Post-install calibration on XMG systems: After fitting, run the laptop on battery until it hibernates at cutoff, then charge uninterrupted to 100% without powering on mid-cycle. This forces the BIOS battery learn cycle to reset against the new cell and clears the inaccurate health warning that appears after every cell swap.
BIOS reporting battery health as poor immediately after fitting
XMG laptops store battery health data in EEPROM on the old cell. When a new cell is installed, the BIOS reads no prior charge history and flags health as unknown or poor. This is a data state, not a hardware fault. Running one complete discharge-to-hibernate followed by a full uninterrupted charge gives the BIOS enough cycle data to recalculate health correctly. After two to three full cycles, the health indicator typically clears to normal.
Laptop cutting out at 20–30% shown on the OS fuel gauge
The fuel gauge IC calibrates against the old cell's discharge curve. After a swap, the stored curve no longer matches the new cell, so the reported percentage drifts from actual voltage. Under full CPU and display load, the real cell voltage drops below the BMS cutoff threshold while the gauge still shows 20–30% remaining. Run two full discharge-to-hibernate cycles to let the fuel gauge IC recalibrate against the new cell's actual curve. If cutoff still occurs early, check that the cell resting voltage reads at least 14.4V after a full charge.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Schenker
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
The XMG U505 BIOS is showing the new battery as "0% health" right after I installed it — is the cell faulty?
The cell is almost certainly fine. XMG's BIOS reads health history stored in the old cell's EEPROM, and a fresh cell has no prior data to read. Run one full discharge to hibernate cutoff, then charge uninterrupted to 100% without powering on mid-cycle. That resets the BIOS battery learn cycle against the new cell, and the health reading corrects within two to three full cycles.
System info shows this battery as 48Wh but the spec says 65Wh — why does the Wh rating look wrong?
The Wh figure displayed in Windows or the BIOS is pulled from EEPROM data embedded in the battery's firmware, not measured live from the cell. On a replacement cell, that stored value can differ from the actual chemistry rating until the fuel gauge IC has enough cycle data to reconcile the two. This does not affect charge acceptance or discharge behaviour. Run two full charge and discharge cycles and the reported Wh figure will typically align closer to the rated 65.12Wh.
My XMG U705 stops charging at exactly 80% and won't go higher — is the replacement battery defective?
This is almost always a BIOS-controlled charge limit, not a battery fault. Schenker and XMG systems include a charge threshold setting in the BIOS or the Control Center software that caps charging at 80% to reduce long-term cell stress when the laptop sits plugged in. Open the XMG Control Center or enter the BIOS and check the battery charge limit setting. Set it to 100%, save, and reboot — charging will resume to full capacity.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.





