Hytera DP505 Replacement Battery BL1502 7.4V 3350mAh
This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.
WECARE5
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Hytera DP505 Replacement Battery BL1502 7.4V 3350mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Hytera DP505 Replacement Battery BL1502 7.4V 3350mAh - is backordered and will ship as soon as it is back in stock.
Voltage
7.4V
Amp
3350mAh
Hytera DP505 / PD402 Series — 7.4V Li-ion Replacement Battery (BL1502)
This is a 7.4V, 3350mAh lithium-ion replacement for the Hytera BL1502 battery pack. It fits the DP505, PD402, PD405, PD406, and over 39 additional Hytera digital portable radio models. Voltage and connector match the original Hytera specification — no modification needed.
- DP500 and PD400 platform compatibility: These models share the same 7.4V rail, battery cavity dimensions, and BMS handshake protocol. The BL1502, BL1504, BL2010, BL2020, and BL2020-EX all use the same connector and contact layout, which is why a single replacement pack covers the full range.
- Bench tested on actual hardware: We cycled this pack on the DP505 platform. The BMS held charge acceptance from the first dock insertion, transmit current spikes during PTT press registered within normal range, and the protection circuit responded correctly to simulated overdischarge conditions.
- First insertion into the charger dock: If the dock shows a fault LED on initial insertion, remove the pack, wipe the gold contact strip with a dry cloth, and reseat firmly. The Hytera platform requires a clean contact cycle to complete the BMS handshake before charging begins — this is not a faulty pack.
Why the DP505 cuts out mid-transmission on a new BL1502
New lithium-ion cells ship at storage voltage — typically around 3.7V per cell, not full charge. When PTT is pressed, transmit current draw spikes sharply. If the cell is at storage voltage, that spike can pull the pack voltage below the BMS overcurrent threshold, triggering a momentary cutoff. This is not a fault in the replacement pack — it is the BMS protecting the cells before they have been fully charged. Charge the pack to full before the first shift and the cutoff will not recur.
Bar indicator showing one fewer bar than expected after fitting the BL1502
The DP505 uses a voltage-threshold bar indicator, not a fuel gauge chip. A new pack at storage voltage reads lower on that threshold scale, so the radio displays one fewer bar than a freshly charged pack would. This is not a capacity defect. Run a full charge cycle through the Hytera dock and let the pack reach 8.4V. The bar display will read correctly once the cells are at rated charge voltage.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Hytera
- Manufacturer: CS
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My DP505 drops to low transmit power after a few hours on shift — is the new BL1502 faulty?
This is voltage sag under sustained RF output, not a defective pack. As the cells discharge, internal impedance rises, and the voltage under high TX load drops enough for the radio to step down output power automatically. We saw this behaviour on the bench when cells dipped below approximately 7.0V under load. If it happens early in a shift, the pack was not at full charge before use — dock it overnight and the drop will move to later in the day as expected.
The Hytera charger dock blinks an error pattern and never starts charging the new pack — what's wrong?
The dock is rejecting the BMS handshake because the contact strip on the new pack has not made a clean connection. Remove the pack, wipe the gold contacts on both the pack and the dock with a dry lint-free cloth, then reseat the pack with firm downward pressure until it clicks. If the dock still blinks, the pack's resting voltage may be below the dock's acceptance threshold from extended storage — insert the pack, leave it seated for 60 seconds without removing it, and the dock will typically begin the recovery charge cycle.
The BL1502 was stored unused for a few months and now the radio shows no power at all — can it be recovered?
Extended storage can push the cell voltage below the BMS recovery threshold, causing the BMS to lock out the pack entirely. Place the pack in the Hytera dock and leave it undisturbed for at least 10 minutes — many Hytera chargers apply a low-current recovery pulse before initiating the main charge cycle. If the dock shows no response after 15 minutes, check that the dock itself powers on with a known-good pack. A pack that has dropped below 5.5V total may not recover through a standard dock cycle.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

