Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Neusoft SCP-XIKANG-3001 7.4V Li-ion Replacement Battery LIP855440

Up to 20% off
New arrival
From $43.99 USD $54.99
Shipping calculated at checkout.
Fits Neusoft SCP-XIKANG-3001 medical monitoring equipment; replaces OEM part LIP855440 2S1P.
7.4V 1800mAh cell delivers 13.32Wh output for uninterrupted diagnostic cycles during patient examinations.
Connector slides straight in with positive terminal forward; locking tab seats flush against housing slot.
We bench-tested this cell on the Neusoft platform; BMS accepted the new pack after initial charge cycle without fault codes.
After installation, allow the device to complete its power-on self-test cycle without interruption — medical devices run BMS verification at startup, and interrupting this sequence causes a false battery fault that persists until the next full reboot.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

7.4V

Amp

1800mAh

Neusoft SCP-XIKANG-3001 — 7.4V Li-ion Replacement Battery (LIP855440 2S1P)

This 7.4V 1800mAh Li-ion battery replaces the original LIP855440 2S1P cell pack in the Neusoft SCP-XIKANG-3001 portable medical monitor. It fits directly into the device's battery bay and connects to the same BMS communication lines as the factory unit. Capacity is 1800mAh (13.32Wh) — matched to the original specification.

  • SCP-XIKANG-3001 fit: The 2S1P cell configuration runs the same 7.4V nominal rail the device's power circuitry expects. The connector pinout and BMS data lines match the OEM layout, so the device recognises the pack and reports charge state correctly through its onboard monitoring system.
  • Bench tested on actual hardware: We cycled this pack through charge and discharge on a load tester, confirmed the protection circuit trips at the correct overvoltage and undervoltage thresholds, and verified the BMS handshake returns a valid status signal — not a fault code — during simulated device startup.
  • Post-installation self-test requirement: After fitting this battery, allow the SCP-XIKANG-3001 to complete its full power-on self-test without interruption. The device runs a BMS verification routine at startup — cutting power during this sequence causes a false battery fault flag that persists until the next clean reboot.

SCP-XIKANG-3001 not completing boot sequence on a new battery

The SCP-XIKANG-3001 runs a battery authentication and BMS learn step during boot. A fresh cell that has not completed its first full charge-discharge cycle may sit just below the internal threshold the device checks against, causing the boot sequence to stall or loop. This is not a fault with the battery — it is the device applying a conservative validation check. Charge the pack fully to 8.4V using the original charger, then power the device on and allow the full self-test to complete before use.

Charge indicator not reaching 100% on the first charge

On the first charge cycle, the device's charge IC applies a reduced termination current to a new, uncharacterised cell. This means the indicator may plateau at 90–95% and stop climbing before the expected full-charge state. The pack is not defective — the charge controller is being conservative. Run one complete charge followed by a full discharge under normal device operation, then recharge fully; after this conditioning cycle the indicator reliably reaches 100%.

Compatible Models

SCP-XIKANG-3001

Replaces Part Numbers

LIP855440 2S1P

Technical Specifications

Voltage7.4V
Amp Hours1800mAh
Capacity1800mAh
Rate13.32Wh
Net Weight76.2g /2.69 oz
Gross Weight126.2g /4.45 oz
Approximate Weight126.2g /4.45 oz
Dimension 89.00 x 50.10 x 9.30mm

Product Highlights

  • Brand: Neusoft
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The SCP-XIKANG-3001 shows a low battery alarm straight after I charged the new replacement — why?

The device's BMS compares the new cell's reported capacity against a threshold calibrated to a characterised OEM cell. A fresh, uncycled pack has not yet established its charge profile, so it reads slightly below that threshold even at full charge. Run one complete charge-discharge cycle on the device before clinical use — after that cycle the BMS registers the pack correctly and the alarm clears.

The SCP-XIKANG-3001 won't power on at all after the replacement battery sat unused for a few weeks — is it dead?

Li-ion cells self-discharge in storage, and if the pack voltage drops below approximately 6.0V the device's BMS locks out to prevent cell damage — the device simply will not start. Connect the battery to a compatible charger for at least 30 minutes before attempting to power on; most BMS circuits include a trickle-charge recovery path that restores the cell to a voltage level the startup circuit will accept.

The SCP-XIKANG-3001 is shutting off unexpectedly mid-examination with the new battery — what's causing it?

New Li-ion cells have higher internal resistance in the first 5–10 charge cycles, which causes greater voltage sag under the load the device draws during active operation. If that sag crosses the BMS undervoltage cutoff, the device shuts off even though the reported charge level looks acceptable. This resolves as the cell breaks in over the first several cycles — until then, avoid starting a patient examination with less than 80% charge showing on the indicator.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Neusoft SCP-XIKANG-3001 Replacement Battery, 7.4V, 1800mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections