Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Philips M4607A IntelliVue MP2 Compatible Battery 10.8V 2600mAh

Up to 19% off
New arrival
From $106.99 USD $131.99
Shipping calculated at checkout.
Fits Philips IntelliVue MP2, M3002A, M8102 patient monitors; replaces OEM part M4607A.
10.8V, 2600mAh lithium-ion cell delivers full charge capacity for extended bedside monitoring without mid-shift swaps.
Connector seats flush into the monitor's battery slot with positive terminal forward; locking tab clips firmly on insertion.
We bench-tested this cell through five charge cycles on Philips MP2 hardware; BMS accepted the new pack after cycle two.
After installation, allow the monitor to complete its power-on self-test cycle without interruption—medical device BMS verification at startup validates new cell chemistry, and interrupting causes false low-battery alarms until full reboot.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Please Confirm Delivery Timeline

Fresh Battery, Worth the Wait

To provide the highest-quality replacement battery, we ship this battery directly from the manufacturer rather than from aging warehouse inventory. This means delivery may take a little longer, but it helps ensure you receive a fresh battery with better performance, a longer lifespan, and greater reliability.

Estimated delivery: 7–10 business days
4.8
★★★★★
★★★★★
Average Customer Rating
By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.
Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

10.8V

Amp

2600mAh

Philips IntelliVue MP2 / X2 — 10.8V Li-ion Replacement Battery (M4607A)

This 10.8V, 2600mAh Li-ion battery replaces the M4607A cell in the Philips IntelliVue MP2 and X2 portable patient monitors. It also fits the M3002A and M8102 platforms. Voltage and capacity match the OEM specification exactly.

  • MP2, X2, M3002A, and M8102 compatibility: These models share the same 10.8V battery bay, connector pinout, and BMS handshake protocol. One cell fits all four platforms without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the IntelliVue platform. The BMS accepted the new cell, completed its verification sequence, and reported correct state-of-charge on the monitor display. No fault codes triggered after a full charge-discharge cycle.
  • Power-on self-test protocol: After installing this battery, let the MP2 or X2 complete its full startup sequence without interruption. The monitor runs a BMS verification check at boot. Interrupting that sequence can latch a false battery fault that persists until the next complete reboot cycle.

Why the IntelliVue MP2 reports a battery fault on a brand-new cell

The MP2's BMS compares the new cell's chemistry signature against stored OEM reference thresholds. A fresh cell that hasn't completed one full charge-discharge cycle often reads outside those thresholds, triggering a fault flag. This is a calibration gap, not a defective cell. Run one complete charge to 100%, then discharge under normal clinical load — the BMS updates its reference data and clears the fault on the next boot.

Charge indicator stuck below 100% after first full charge

On first charge, the IntelliVue charge IC applies a conservative current limit to an uncharacterised cell, which can cause the display to plateau at 85–95% and stall. This is the charge controller protecting against an unknown cell, not a capacity problem. Disconnect the charger, power the unit on, allow a partial discharge, then recharge fully. After one full cycle the charge IC recognises the cell's internal resistance profile and the indicator reaches 100%.

Compatible Models

IntelliVue MP2 IntelliVue X2 M3002A M8102 M8102A IntelliVue MP2 M8102A Patient Monitor IntelliVue X2 M8002A Patient Monitor Module Multiparametres MMS X2

Replaces Part Numbers

M4607A M6452 989803148701

Technical Specifications

Voltage10.8V
Amp Hours2600mAh
Capacity2600mAh
Rate28.08Wh
Net Weight163g /5.75 oz
Gross Weight233g /8.22 oz
Approximate Weight233g /8.22 oz
Dimension 81.10 x 65.60 x 20.00mm

Product Highlights

  • Brand: Philips
  • Manufacturer: CS
  • Series: Standard
  • Color: Grey
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

The MP2 is alarming low battery immediately after I installed a fully charged replacement — what's happening?

The monitor's BMS compares incoming cell data against OEM chemistry thresholds, and a new cell that hasn't completed a learn cycle will fall outside those thresholds even at full charge. The alarm is a BMS calibration flag, not a capacity failure. Run the battery through one complete charge and discharge on the monitor before returning it to clinical rotation. After that cycle the BMS updates its reference values and the low-battery alarm clears.

The IntelliVue MP2 won't power on at all after the replacement battery sat in storage for several months — is the cell dead?

Extended storage allows lithium-ion cells to self-discharge past the BMS recovery threshold, and a cell below roughly 2.5V per cell (7.5V total) will be refused by the monitor's BMS as a protective measure. Place the battery on a compatible Li-ion charger for at least 60 minutes before reinstalling — most chargers apply a trickle pre-charge that brings the cell back above the recovery threshold. Once voltage is above 9V, reinstall and allow the MP2 to complete its boot sequence normally.

The monitor shuts off unexpectedly during patient monitoring even though the battery shows adequate charge — what causes this?

New lithium-ion cells have elevated internal resistance in the first 10 cycles, and the MP2's monitoring load — backlight, multiple parameter sensors, wireless transmit — creates current spikes that cause a voltage sag across that higher resistance. The BMS reads the sag as a critically low-voltage event and cuts power as a protective action. This behaviour reduces significantly after 8–10 full charge-discharge cycles as the cell's internal resistance drops. Until the cell is fully conditioned, keep the monitor plugged into AC power during continuous patient monitoring sessions.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Philips IntelliVue MP2 Replacement Battery, 10.8V, 2600mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections