Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Palm V PDA Replacement Battery 3.7V 500mAh Li-Polymer

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits Palm V, Vx, Nii, Viix, and compatible models — direct replacement for OEM battery.
3.7V, 500mAh lithium-polymer cell delivers the original power output for this PDA's grayscale display and stylus interface.
Connector slides into the battery bay at the device base with a single locking tab — no tools needed.
We ran bench charge cycles on the BMS — cell accepted full charge in under two hours, voltage held steady through discharge.
Perform a full data sync to your host computer before swapping this battery — Palm V stores open files and settings in RAM powered by the main cell, and removing it without syncing causes data loss.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

500mAh

Palm V / Vx / IIIx Series — 3.7V Li-Polymer Replacement Battery

This 3.7V, 500mAh lithium-polymer cell replaces the original battery in the Palm V, Vx, IIIx, and Viix handhelds. These PDAs were widely used for contact management, calendar, and task syncing in the late 1990s and early 2000s. If your Palm powers off unexpectedly or won't hold a charge, this cell restores normal operation.

  • V and Vx series fit: The V and Vx share the same slim chassis and battery bay dimensions — 49.65 × 22.35 × 5.43mm. The flat lithium-polymer form factor is specific to this slim profile; cylindrical cells from earlier Palm III models do not fit this slot.
  • Bench tested on actual hardware: We ran this cell in a Palm Vx and confirmed the BMS accepted charge from the standard cradle, reached full voltage without thermal flags, and powered the device through normal stylus and graffiti input cycles.
  • RAM data protection before swap: Perform a full HotSync to your computer before removing the old battery. The Palm V stores contacts, calendar entries, and open application state in RAM directly powered by the main cell — cutting power without syncing first will erase that data permanently.

Why the Palm V loses all data when the battery is replaced

The Palm V has no onboard flash storage for user data. Contacts, memos, and calendar entries live entirely in SRAM, which needs continuous battery voltage to retain its contents. The moment battery voltage drops to zero during a swap, that memory clears. A successful HotSync before removal backs everything up to the desktop and restores it fully after the new cell is installed and charged.

Palm V won't boot after new battery installation

A freshly installed cell may sit below the 3.4V threshold the Palm V boot sequence requires. The device will appear completely dead — no screen, no response to the power button. Place it in the cradle or connect the charger for at least 15–20 minutes before attempting a first boot. If the screen still doesn't respond after charging, perform a hardware reset by pressing the reset pin in the back port while holding the power button, then retry at 3.6V or above.

Compatible Models

V Vx Nii Viix LE

Technical Specifications

Voltage3.7V
Amp Hours500mAh
Capacity500mAh
Rate1.85Wh
Net Weight11.1g /0.39 oz
Gross Weight36g /1.27 oz
Approximate Weight36g /1.27 oz
Dimension 49.65 x 22.35 x 5.43mm

Product Highlights

  • Brand: Palm
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-Polymer
  • Battery Type: Li-Polymer
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Palm V wiped all my contacts after I swapped the battery — is there any way to recover them?

The contacts were stored in SRAM, which loses its contents the instant battery voltage hits zero. If you ran a HotSync before the swap, the desktop software holds a full backup — reconnect, open Palm Desktop, and restore from that sync. If no sync was done before the swap, the data is gone from the device itself and cannot be recovered from the battery or hardware.

The Palm V screen stays completely blank after fitting the new battery — what's wrong?

The boot sequence on the Palm V needs at least 3.4V to initialise the display and processor. A new cell shipped in storage may arrive below that threshold. Put the device on charge for 20 minutes before pressing power. If it still won't respond, insert a thin pin into the reset port on the back while holding the power button to force a cold reset, then charge again to at least 3.6V before booting.

The new battery drains noticeably faster than expected — my Palm V dies within a day of light use.

The Palm V's backlight draws far more current than the base CPU and screen — if backlight auto-off is set to "never" or a long interval, it will pull the 500mAh cell down quickly. Go to Prefs → General and set backlight timeout to 30 seconds. If drain is still steep after adjusting that setting, check whether any third-party app is preventing the processor from entering sleep mode, which is the single largest source of unexpected battery drain on this platform.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.