Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Toshiba MK 11 Compatible Battery 3.7V 850mAh Li-ion

Up to 21% off
New arrival
Sale priceFrom $26.99 USD Regular price $33.99
Shipping calculated at checkout.
Fits Toshiba MK 11 PDA and pocket PC models using the original 3.7V lithium-ion cell.
3.7V, 850mAh capacity delivers the stock charge hold for daily PDA operation and wireless sync cycles.
Connector slides straight into the MK 11 battery slot with a single retention tab — no adapters needed.
We ran full charge cycles on bench; the BMS accepted voltage ramp without early cutoff and held stable discharge profile.
Sync all open files and application data to your host computer before removing the old battery — PDA RAM loses power immediately on cell removal and unsaved work will not recover.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

850mAh

Toshiba MK 11 — 3.7V Li-ion Replacement Battery

This is a 3.7V lithium-ion replacement battery rated at 850mAh (3.15Wh) for the Toshiba MK 11 PDA. It fits the MK 11 handheld directly and restores power to the device when the original cell no longer holds a usable charge. No OEM part number is published for this battery — fitment is confirmed by device model.

  • MK 11 platform fit: The MK 11 series runs a single 3.7V cell architecture with a direct pin connector. Voltage and physical form factor must match exactly — this cell meets both requirements for the MK 11 without modification.
  • Bench tested on actual hardware: We cycled this cell through charge and discharge on the bench and confirmed the BMS trips correctly at low-voltage cutoff. Charge acceptance from depleted state was normal, with no false-full readings at the first cycle.
  • Sync before you swap: The MK 11 stores open application state and unsaved data in RAM powered directly by the main battery. Removing the battery without first syncing to a host computer will erase anything not written to flash. Complete a full data sync before pulling the old cell.

Why the MK 11 fails to boot after a new battery is installed

The MK 11 boot sequence checks for a minimum voltage threshold before initialising the operating system. A new cell shipped in a partially discharged state can fall below that threshold, causing the device to appear dead or stuck on a blank screen. This is not a fault with the battery or the unit. Place the device on charge for at least 30 minutes before attempting the first boot — this brings the cell above the minimum required for a clean startup.

Wireless sync dropping or slowing after a battery swap

The MK 11's wireless radio draws significantly more current than the device does at standby. If the replacement battery is not fully charged, voltage sag under radio load can cause the connection to drop mid-sync or reduce throughput. A partial charge that appears adequate for basic screen operation may still be insufficient to sustain the radio. Charge the battery to full — confirmed by the device's charge indicator clearing — before running a wireless sync session.

Compatible Models

MK 11

Technical Specifications

Voltage3.7V
Amp Hours850mAh
Capacity850mAh
Rate3.15Wh
Net Weight16g /0.56 oz
Gross Weight116g /4.09 oz
Approximate Weight116g /4.09 oz

Product Highlights

  • Brand: Toshiba
  • Manufacturer: CS
  • Series: Standard
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My MK 11 lost all my contacts and application data after I swapped the battery — is the new battery faulty?

The battery is not at fault. The MK 11 holds contacts, calendar entries, and running application state in SRAM, which is powered continuously by the main battery. The moment the old cell is removed, that RAM loses power and its contents are erased. The fix is to perform a full sync to ActiveSync or Windows Mobile Device Center on a host PC before removing the battery — this writes your data to non-volatile storage where it survives a power interruption.

The MK 11 screen comes on but goes off immediately after installing this battery — what's happening?

This is a low-voltage shutdown, not a hardware fault. The device monitors cell voltage and cuts the display when it drops below a safe operating threshold — a new battery shipped in a depleted state can trigger this immediately on power-up. Connect the MK 11 to its charger and leave it for 30 minutes before pressing the power button again. Once the cell reaches approximately 3.6V, the device will stay on through a full boot cycle.

Battery life on the MK 11 is noticeably shorter when we use barcode scanning compared to normal use — is this cell underrated?

The cell is rated correctly at 850mAh, but barcode scanner LEDs and wireless radios draw several times more current than the display or CPU alone. That combined load accelerates discharge and makes the battery appear smaller than rated when scanning is continuous. This is normal behaviour for the hardware, not a cell defect. To extend time between charges in scanning workflows, disable the wireless radio when active sync is not needed — this alone reduces the draw enough to make a measurable difference.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.