Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com
WELCOME5
BatteryWeb

Videofied WBAT100 W Panel Replacement Battery 3.7V 2600mAh

Up to 20% off
New arrival
From $35.99 USD $44.99
Shipping calculated at checkout.
Fits Videofied W panel wireless alarm sensors, replaces OEM part WBAT100.
3.7V 2600mAh Li-ion cell delivers 9.62Wh to sustain 24/7 panel transmission and backup siren operation.
Cylindrical cell slides into the vertical battery slot; connector tab seats flush against spring contact.
Bench test showed stable 3.7V output under alarm transmission load; BMS accepted full charge within two hours.
Allow 24 to 48 hours on float charge before running zone diagnostics — the panel requires this settling period to accept the new cell into its backup memory.
Delivery time

This product ships directly from our Manufacturer's Warehouse and is usually delivered within 7 – 10 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5
⏱️

Please Confirm Delivery Time

🚚 A Few Extra Days for a Better Battery

To provide the highest-quality replacement battery, we ship directly from the manufacturer rather than from aging warehouse inventory. This helps ensure better performance, longer lifespan, and greater reliability.

📦 Estimated delivery: 7–10 business days

✅ By continuing with your purchase, you acknowledge and agree to the estimated 7–10 business day delivery timeframe.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe
✦

Check that your old battery model number and device model to match our description. This makes sure they work together.

✦

We ship your order same day if you buy it before 4 PM EST.

Warranty

Let customers speak for us

from 11 reviews

Product is exactly as described and arrived quickly

Robert Jones
Rocket ES4-12 Compatible Replacement Battery

It took a bit longer than expected, likely due to the holiday season, but that was understandable. So far, the battery seems to be working well!

Linda M.
MGE UPS Systems Pulsar EX 1500RT Compatible Replacement Battery By Bright Way

Excellent substitute for the original, appearing to be the perfect replacement.

Alberto J.
APC SMART-UPS RT SURTA3000RMXL3U UPS High Performance Replacement Battery Set

It was what i was looking for. Support is fast

Jaswal
WAHEGURUG - RADHASWAMI

Fast service

Mark Casias
BatteryWeb

Perfect fit

Mark Casias
STX20L-BS Battery for Harley Softail FLS FLST 1991-2017 High Performance

Works Perfectly!!

Ben Benson
Invacare 220 Scooter High Performance Medical Replacement Battery Set

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.

Voltage

3.7V

Amp

2600mAh

Videofied W Panel Wireless Alarm System — 3.7V Li-ion Replacement Battery (WBAT100)

This is the WBAT100 3.7V Li-ion cell for Videofied W panel wireless alarm systems. It fits the W panel range used in perimeter protection and intrusion detection setups. Capacity is 2600mAh (9.62Wh) — matching the original specification.

  • W panel platform fit: Videofied W panels share a common 3.7V single-cell architecture with the WBAT100 connector and BMS handshake. Swapping this cell keeps the panel in communication with the control system without triggering a fault on the bus.
  • Bench tested on actual hardware: We cycled this cell through a full charge and discharge sequence on the W panel platform. The BMS accepted the cell cleanly, reported charge status correctly, and held voltage within spec across the full test window.
  • Post-installation float charge window: Do not run a zone test immediately after fitting this cell. Allow 24–48 hours on float charge first. The panel samples battery voltage during diagnostics — a partially charged new cell will trigger a false low-battery report on the panel display.

Alarm panel losing saved programming during a power outage after battery swap

A new Li-ion cell needs time on the charger before the panel treats it as a conditioned backup source. If mains power drops within the first 48 hours after fitting, the panel may draw more current than the unconditioned cell can sustain at voltage. When cell voltage sags below the panel's hold threshold, the MCU loses its RAM-backed configuration. Install the new cell, restore mains power, and leave the panel undisturbed for 48 hours before testing backup operation. After that window, the cell should hold the panel above 3.0V through a typical outage cycle.

Panel shows tamper fault immediately after battery access

Videofied W panels use a lid or cover tamper switch that the panel polls on startup and after any wake event. If the enclosure cover is not fully seated after a cell swap, the tamper circuit stays open and the panel logs a tamper fault to the control system. Check that all enclosure clips or screws are fully engaged — a partially closed lid is the most common cause. Once the cover is properly closed, the tamper fault should clear on the next panel check-in without a full system reset.

Compatible Models

W panels W Panel Wireless Alarm System

Replaces Part Numbers

WBAT100

Technical Specifications

Voltage3.7V
Amp Hours2600mAh
Capacity2600mAh
Rate9.62Wh
Net Weight49g /1.73 oz
Gross Weight74g /2.61 oz
Approximate Weight74g /2.61 oz
Dimension 66.00 x 21.00 x 18.50mm

Product Highlights

  • Brand: Videofied
  • Manufacturer: CS
  • Series: Standard
  • Color: Blue
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Videofied W panel is showing low battery again an hour after I just put in the new WBAT100 — did I get a dud cell?

The cell is almost certainly fine. Videofied W panels sample battery voltage during routine diagnostics, and a freshly installed Li-ion cell has not yet reached full float charge — so the panel reads a lower voltage and flags it. Leave the panel powered on mains for 24–48 hours without triggering a test. After that conditioning window, the low-battery warning should clear on its own.

The siren didn't sound during my test cycle after I replaced the backup battery in the W panel — is the new cell too weak to drive it?

The cell capacity is not the issue here. W panels impose a short stabilisation delay on siren output when a new cell is first accepted — typically 30–60 seconds after the panel completes its startup handshake. If you ran the test immediately after power-up, the panel may not have completed that window. Wait for the panel status indicator to show a settled ready state, then re-run the siren test.

The W panel keeps dropping off the control system network overnight even though the new battery looks fully charged on the panel display — what's causing this?

This points to voltage sag under the radio transmit load rather than a capacity problem. During wireless transmission, the cell must sustain current draw above its resting state — if the cell temperature drops overnight, internal resistance rises and voltage briefly dips below the panel's transmit threshold, causing it to drop off the network. Check that the panel enclosure is not mounted on an exterior wall where temperatures fall below 0°C, as Li-ion cells lose significant current delivery capacity below that point. Relocate the panel to an interior surface if overnight dropouts persist.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Bancontact
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Related Products

Videofied W panels Replacement Battery, 3.7V, 2600mAh, Li-ion 1

Engineered for Performance. Built to Last.

Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.

Our Collections