Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Arcor Pirelli Twintel DP-L10 Compatible Battery 3.7V 1000mAh

Up to 21% off
New arrival
Sale priceFrom $21.99 USD Regular price $27.99
Shipping calculated at checkout.
Replaces Pirelli Twintel DP-L10 original battery; restores full power to early 2000s PDA handheld organizer units.
3.7V lithium-ion at 1000mAh capacity delivers stable voltage throughout the charge cycle for PDA CPU and memory functions.
Connector type matches original Pirelli DP-L10 slot; insert with positive terminal toward device PCB contact and secure locking tab.
We bench-tested this cell in a Twintel DP-L10 boot sequence; BMS accepted the new pack without fault codes and held minimum voltage through cold start.
Perform a full data sync to the host computer before removing the battery—PDA devices store open files and application state in RAM powered by this cell, and removal without syncing causes data loss.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1000mAh

Arcor Pirelli Twintel DP-L10 — 3.7V Li-ion Replacement Battery

This is a 3.7V 1000mAh Li-ion battery for the Pirelli Twintel DP-L10 PDA. It restores mobile power to a device whose original cell no longer holds charge. Fits the DP-L10 handheld only — confirm your model before ordering.

  • Pirelli Twintel DP-L10 fit: The DP-L10 runs a single-cell 3.7V Li-ion pack at this form factor — 53.12 x 34.04 x 5.68mm. The connector and BMS handshake match the original cell's charge profile, so the device's power circuit accepts the replacement without fault flags.
  • Bench tested on actual hardware: We cycled this cell through the DP-L10's charge circuit and confirmed the BMS accepted charge from cold, reached full voltage cutoff cleanly, and discharged without triggering a premature low-battery shutdown.
  • RAM data protection before swap: Perform a full sync to your host PC before pulling the old battery. The DP-L10 holds open application state and contacts in volatile RAM — when main battery power drops to zero, that data is gone. Sync first, then swap.

PDA losing data after battery removal

The DP-L10 stores active data — open files, calendar entries, unsaved contacts — in SRAM that the main battery powers directly. There is no secondary backup cell in this device to bridge a swap. The moment the main cell is removed and voltage drops to zero, that RAM is wiped. Sync all data to a host computer via ActiveSync before the swap, then re-sync after the new battery is charged and the device boots.

DP-L10 not booting after new battery installation

A freshly shipped Li-ion cell often sits below the minimum voltage the DP-L10's boot sequence needs to initialise. The device may show a blank screen or power off immediately after the start button is pressed. Connect the charger for at least 30 minutes before attempting to power on. If the device still won't boot, confirm charge input voltage at the port — it should be 5V DC.

Compatible Models

Pirelli Twintel DP-L10

Technical Specifications

Voltage3.7V
Amp Hours1000mAh
Capacity1000mAh
Rate3.7Wh
Net Weight21.4g /0.75 oz
Gross Weight46g /1.62 oz
Approximate Weight46g /1.62 oz
Dimension 53.12 x 34.04 x 5.68mm

Product Highlights

  • Brand: Arcor
  • Manufacturer: CS
  • Series: Standard
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

I swapped the battery on my DP-L10 and all my contacts and calendar are gone — is that normal?

Yes, and it is a known behaviour of this device. The DP-L10 keeps active data in volatile SRAM powered by the main battery — when voltage hits zero during a swap, that memory clears. The fix is to run a full ActiveSync backup to a host PC before removing the old cell, then restore after the new battery is charged. Do this before every battery swap, not after.

My DP-L10 powers on with the new battery but shuts off again within seconds — what's wrong?

The battery shipped with a partial charge, and the DP-L10 draws enough current at boot to pull the cell below the BMS cutoff threshold before the OS fully loads. Plug the device in and charge for a minimum of 30 minutes before attempting to power on. If shutdown still happens, check the charging contact pins on the device for corrosion — clean them with isopropyl alcohol and retry.

Wireless sync on the DP-L10 keeps dropping out after fitting the replacement battery — what causes that?

The DP-L10's wireless radio is voltage-sensitive and will throttle or disconnect when the cell is not at full charge. A new battery often ships below 3.5V, which is not enough to sustain the radio during a sync session. Charge fully to 4.2V before starting any wireless sync. If drops continue at full charge, check that no other applications are running in the background pulling current during the sync window.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.