Welcome to our store. Proudly serving customers across North America for years. Learn more

For support or quotes: sales@batteryweb.com

WELCOME10
BatteryWeb

Bissell 1719 Cordless Vacuum Replacement Battery 9.6V 1800mAh

Up to 20% off
New arrival
Sale priceFrom $43.99 USD Regular price $54.99
Shipping calculated at checkout.
Fits Bissell 1719 Cordless Vacuum Spot and 1719 Stain Cleaner; replaces OEM battery D-SC1700X8.
9.6V Ni-MH pack delivers 1800mAh; sustains motor torque on carpet and upholstery without voltage sag.
Connector slides straight into battery slot with positive terminal forward; locking tab clicks into place.
Bench tested on the 1719 platform — BMS engaged cleanly on dock; motor drew steady current under suction load.
Do not leave this vacuum on the charging dock continuously; Ni-MH cells degrade faster under trickle charge than cycled use.
Extended delivery time

Available by SPECIAL ORDER. Delivery for this product typically takes 2 weeks.

Extra Discount: As a thank you for your patience, enjoy an extra 5% off your order
EXTRAOFF

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

9.6V

Amp

1800mAh

Bissell 1719 Cordless Vacuum Spot — 9.6V Ni-MH Replacement Battery (D-SC1700X8)

This is a 9.6V 1800mAh Ni-MH replacement battery for the Bissell 1719 Cordless Vacuum Spot and 1719 Stain Cleaner. It slots into the same bay as the original pack and runs the same 9.6V motor rail. OEM part number D-SC1700X8 confirms fitment.

  • 1719 and 1719 Stain Cleaner fitment: Both models share the same 9.6V motor rail, connector, and battery bay dimensions. One pack covers both units — no adapters or wiring changes needed.
  • Bench tested on actual hardware: We cycled this pack through multiple charge and discharge runs on a 1719 unit. The BMS held voltage within spec across the full discharge curve and did not trip under sustained motor load with a clean filter installed.
  • Dock charging habit on the 1719: The 1719 charger does not cut off automatically when the pack reaches full charge. Leaving the vacuum on the dock permanently allows trickle current to heat the Ni-MH cells over time. Charge to full, then remove from the dock.

Suction dropping before the battery indicator reaches low

A restricted filter forces the 1719 motor to draw more current to maintain airflow. As draw increases, the 9.6V pack sags under the added load and the motor slows — this reads as suction loss, not battery failure. The battery indicator may still show charge remaining because cell voltage hasn't crossed the low threshold yet. Clean or replace the filter first before assuming the battery is at fault.

Motor cuts out mid-use then recovers after a short pause

This is a BMS overcurrent trip, not a dead cell. When suction is partially blocked — by a clogged filter or debris caught at the nozzle — the motor sustains a high-draw condition long enough to trigger the BMS protection circuit. The pack shuts output, cools for a moment, then resets. If this happens repeatedly, inspect the filter and nozzle for blockage before replacing the battery. A fully clear airpath keeps current draw within the BMS threshold.

Compatible Models

1719 Cordless Vacuum Spot 1719 Stain Cleaner

Replaces Part Numbers

D-SC1700X8

Technical Specifications

Voltage9.6V
Amp Hours1800mAh
Capacity1800mAh
Rate17.28Wh
Net Weight367g /12.95 oz
Gross Weight437g /15.41 oz
Approximate Weight437g /15.41 oz
Dimension 86.50 x 94.80 x 45.20mm

Product Highlights

  • Brand: Bissell
  • Manufacturer: CS
  • Series: Standard
  • Color: Green
  • Product Type: Ni-MH
  • Battery Type: Ni-MH
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

Why does my Bissell 1719 lose suction well before the battery light shows low?

A partially blocked filter forces the motor to pull more current than rated to maintain airflow, which causes voltage sag on the 9.6V pack and slows the motor — the battery indicator hasn't dropped because cell voltage is still above the low threshold. The suction drop is a load response, not a capacity problem. Remove and clean the filter thoroughly, then retest. If suction restores, the battery was never the issue.

My 1719 motor shuts off for a few seconds mid-clean then kicks back on — what's happening?

That's the BMS overcurrent protection tripping. When airflow is restricted — by a blocked nozzle or saturated filter — the motor sustains an abnormal current draw and the BMS cuts output to protect the cells. After a brief pause, it resets and the motor runs again. Clear the nozzle and replace or clean the filter; if the cutout stops happening, the battery is fine and the airpath was the fault.

The Bissell 1719 battery fades noticeably after a few months — is that normal for this chemistry?

Ni-MH cells degrade faster under continuous trickle charge than Li-ion, and the 1719 dock does not terminate charge automatically when the pack is full. Leaving the vacuum on the dock between every use exposes the cells to sustained low-level current and heat, which accelerates capacity fade. Charge the pack fully, disconnect from the dock, and only return it when the battery is depleted. That single change extends cell life significantly.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.