Cobra 2130139001 Cordless Phone Replacement Battery 3.6V 600mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Cobra 2130139001 Cordless Phone Replacement Battery 3.6V 600mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Cobra 2130139001 Cordless Phone Replacement Battery 3.6V 600mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.6V
Amp
600mAh
Cobra 2130139001 / AN8525 / AN8526 / AN8591 Series — 3.6V Ni-MH Replacement Battery
This is a 3.6V, 600mAh Ni-MH replacement battery for Cobra cordless phone models including 2130139001, AN8525, AN8526, and AN8591, among others. It slots into the handset where the original pack sits and restores full talk and standby operation. Voltage and capacity match OEM spec exactly — no modification needed.
- AN8525 / AN8526 / AN8591 and 2130139001 compatibility: These Cobra handsets share the same 3.6V three-cell NiMH pack format, identical connector pinout, and the same physical footprint — 40 × 42 × 13.5mm. The base station charges through the same contact pair across all listed models, so one pack covers the full range.
- Bench tested on actual hardware: We cycled this pack on a Cobra DECT handset and confirmed the base station accepted the charge handshake without error. The BMS held voltage through both talk and standby draw without dropping below the low-battery threshold prematurely.
- First-charge conditioning for NiMH handsets: After installing, seat the handset in the base and leave it for a full 16 hours before first use. NiMH cells in cordless phones need a slow initial charge to reach rated capacity — skipping this is the main reason users report short talk time after a swap.
Base station showing a charging error after fitting a new NiMH pack
Cobra base stations check for a minimum voltage threshold when the handset is docked. A new NiMH pack fresh from storage can sit at 3.0V or lower — below what the base expects before it begins a charge cycle. Some units interpret this as a faulty battery and flash an error light instead of charging. The fix is to place the handset in the base and leave it — most Cobra chargers will eventually begin a trickle charge after a short timeout, recovering the pack voltage to an acceptable level.
Range dropping noticeably in rooms that were fine with the old battery
Cordless DECT handsets draw a spike of current each time the RF transmitter fires. If a NiMH cell is not yet conditioned, its internal resistance is higher, and voltage sags briefly under that transmit load. The handset reads the sag as low battery and reduces transmit power to protect the pack — cutting range as a result. Run three to five full charge-and-use cycles and internal resistance drops, voltage holds steadier under RF load, and range returns to normal.
Compatible Models
Technical Specifications
Product Highlights
- Brand: Cobra
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Ni-MH
- Battery Type: Ni-MH
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My Cobra handset shows full charge but the talk time is much shorter than expected after swapping the battery — is the new pack faulty?
Almost certainly not — this is standard NiMH behaviour in the first few cycles after a swap. Fresh NiMH cells have higher internal resistance and don't reach rated capacity until they've been conditioned through three to five full charge-and-discharge cycles. Run the handset down until it signals low battery, then return it to the base for a full charge — repeat this three to five times and talk time should climb to rated capacity.
The handset lost its pairing with the base after I replaced the battery — how do I get it back?
Removing the battery cuts all power to the handset, and some Cobra DECT models store pairing data in volatile memory — when power drops to zero, that data clears. Re-register the handset through the base station's pairing or registration menu, usually accessed by holding the page/find button on the base for several seconds. Check the model's quick-start guide for the exact button sequence — the process takes under two minutes.
The handset is draining overnight even when it's sitting in the base — why won't it hold a charge?
This usually means the handset isn't making clean contact with the base charging pins. Check that the contacts on both the handset and the base are free of dust or oxidation — a quick wipe with a dry cloth is enough. If the contacts are clean and the drain continues, confirm the base has power and the charge indicator light comes on when the handset is seated. A handset drawing standby current all night without topping up from the base will be flat by morning regardless of battery condition.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.




