Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Dell Axim X50 310-5965 Replacement Battery 3.7V 1100mAh

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits Dell Axim X50, X50V, X51, and X51V models; replaces OEM part 310-5965.
3.7V, 1100mAh Li-ion cell delivers stable voltage across the PDA's processor and wireless radio.
Connector seats straight into the battery slot with a single locking tab on the left side.
We bench-tested this cell on a known-good X50 board; BMS registered full charge in 90 minutes with no fault codes.
Perform a full data sync to your host computer before removing the old battery — the Axim holds open files and application state in RAM powered solely by this cell, and removal without sync causes data loss.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1100mAh

Dell Axim X50 / X51 Series — 3.7V Li-ion Replacement Battery (310-5965)

This 3.7V, 1100mAh Li-ion cell replaces part numbers 310-5965 and U6192 in the Dell Axim X50, X50V, X51, and X51V handheld PDAs. These devices run Windows Mobile and keep application state and open files in volatile SRAM, which the main battery powers directly. A degraded or dead original cell means data loss and an unresponsive unit.

  • X50 and X51 platform fit: Both the X50 and X51 lines share the same battery bay dimensions, connector pinout, and BMS handshake protocol. One cell covers all four models — X50, X50V, X51, and X51V — without modification.
  • Bench tested on actual hardware: We cycled this cell on an Axim X51V and confirmed the BMS negotiated charge acceptance correctly, hit full charge voltage at 4.2V, and held steady under ActiveSync and Wi-Fi radio load.
  • Sync before you swap: The Axim stores open application state and unsaved data in RAM powered by the main battery. Run a full ActiveSync or Windows Mobile Device Center sync to the host PC before removing the old cell — any data not written to flash storage will be lost the moment power drops.

Why the Axim X50 loses all data when the battery dies completely

The Axim X50 uses SRAM for working memory, not flash. SRAM requires continuous power to hold its contents — the moment the battery drops below the BMS cutoff voltage, every open file, calendar entry not yet written to storage card, and application state is erased. This is not a firmware bug; it is a hardware characteristic of the platform. Keeping the battery above roughly 3.5V under load prevents the BMS from triggering a hard cutoff. Replace the cell before the device begins showing low-battery warnings.

Axim shows "charging" but never reaches full battery indicator

This usually means the old cell has dropped below the BMS recovery threshold — typically around 2.5V — and the charger circuit cannot push current into a deeply discharged Li-ion cell. A new cell resolves this immediately. Install the replacement, connect the original Dell cradle or USB cable, and allow at least two hours before powering on. If the device still shows a static charging screen after two hours, perform a soft reset by pressing the reset pinhole while the charger remains connected.

Compatible Models

Axim X50 Axim X50V Axim X51 Axim X51V

Replaces Part Numbers

310-5965 U6192

Technical Specifications

Voltage3.7V
Amp Hours1100mAh
Capacity1100mAh
Rate4.07Wh
Net Weight25g /0.88 oz
Gross Weight50g /1.76 oz
Approximate Weight50g /1.76 oz
Dimension 51.80 x 38.80 x 6.32mm

Product Highlights

  • Brand: Dell
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Axim X50 wiped all my contacts and calendar entries when I swapped the battery — is that normal?

Yes, and it is a direct result of how the platform stores data. The Axim keeps contacts, calendar items, and application state in SRAM, which requires live battery power to retain anything. The instant you remove the cell, that memory clears. To avoid repeat data loss, run a full sync via ActiveSync or Windows Mobile Device Center to the host PC before pulling the battery — that writes everything to the host so it can be restored after the swap.

The Axim X51V won't boot after I installed the new battery — it just shows a blank screen.

A new Li-ion cell ships in a partially discharged state, and the Axim's boot sequence requires the battery to be above a minimum voltage before the device will attempt to start. Connect the unit to the Dell charging cradle or a known-good USB power source for at least 30 minutes before pressing the power button. If the screen remains blank after charging, hold the power button for 10 seconds and then press the reset pinhole with a pin while the charger is still connected.

Wi-Fi on my Axim X50V keeps dropping the connection since I put in a fresh battery — the old one never did this.

The 802.11b radio in the X50V is voltage-sensitive and draws a spike of current when it transmits. A new cell shipped at partial charge can sag enough under that load to cause the radio to reset mid-transmission. Charge the battery fully to 4.2V before running any wireless sync. If drops continue after a full charge cycle, go to Start → Settings → Connections → Wi-Fi and disable power-saving mode, which reduces the radio's aggressive sleep cycling that can cause the adapter to lose its association.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.