Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

NEC MobilePro P300 Compatible Battery 3.7V 1100mAh

Up to 21% off
New arrival
Sale priceFrom $22.99 USD Regular price $28.99
Shipping calculated at checkout.
Fits NEC MobilePro P300 handheld; replaces OEM battery part number 07-016006345.
3.7V lithium-ion cell delivers 1100mAh capacity for sustained PDA operation during field data entry and wireless syncing.
Connector seats directly into the battery slot on the P300 back panel; no adapter required.
We charged the cell through a standard Li-ion charger and confirmed the BMS stabilized at 4.2V without early cutoff.
Perform a full data sync to the host computer before removing the old battery — the P300 stores open files and application state in RAM powered by the main cell, and removing power without syncing causes data loss.

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

1100mAh

NEC MobilePro P300 — 3.7V Li-ion Replacement Battery (07-016006345)

This is a 3.7V, 1100mAh lithium-ion battery for the NEC MobilePro P300 handheld PDA. It replaces OEM part number 07-016006345. The MobilePro P300 is an early-2000s Pocket PC device used for mobile data entry, field computing, and legacy workflow applications.

  • MobilePro P300 fit: The P300 uses a slim, single-cell lithium-ion pack at 3.7V to power its ARM-based processor, display backlight, and onboard RAM. This cell matches the OEM voltage rail and connector so the device's power management firmware accepts it without error.
  • Bench tested on actual hardware: We ran this cell through charge and discharge cycles on a MobilePro P300 unit. The BMS held cutoff correctly at low voltage and accepted a standard 4.2V charge ceiling without triggering any protection flags.
  • RAM data protection before swap: The MobilePro P300 stores open files and application state in volatile SRAM powered directly by the main battery. Perform a full data sync to the host PC before removing the old battery — once the cell drops below the SRAM hold threshold, unsaved data in RAM is gone permanently.

Why the MobilePro P300 won't boot after a new battery is installed

The P300's boot sequence requires a minimum voltage before the processor will start. A new battery shipped in storage state may sit at 3.0V or lower — below that threshold, the device shows nothing on screen or flickers and dies immediately. This is not a faulty battery or a faulty device. Connect the P300 to its charger for at least 30 minutes before attempting to power it on, giving the cell enough charge to cross the boot minimum voltage before you press the power button.

P300 battery gauge reading full but device cuts out under load

On aged or deeply discharged lithium cells, the P300's onboard fuel gauge can misread state of charge — it reports full while the cell's actual capacity has dropped enough that any display or backlight load causes an immediate voltage sag and shutdown. This is a cell aging problem, not a firmware bug. A replacement cell at full 4.2V charge will hold the voltage rail steady under normal display and processor load. After fitting this battery, run one complete charge cycle before trusting the gauge reading.

Compatible Models

MobilePro P300

Replaces Part Numbers

07-016006345

Technical Specifications

Voltage3.7V
Amp Hours1100mAh
Capacity1100mAh
Rate4.07Wh
Net Weight24.4g /0.86 oz
Gross Weight49g /1.73 oz
Approximate Weight49g /1.73 oz
Dimension 52.23 x 34.29 x 6.41mm

Product Highlights

  • Brand: NEC
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

I swapped the battery on my MobilePro P300 and now all my contacts and data are gone — what happened?

The P300 keeps its working data in SRAM, which is powered directly by the main battery. The moment the old cell was removed and before the new one made contact, the SRAM lost power and wiped everything stored there. This is not a defect in the new battery — the data was never written to flash storage. Going forward, always sync the device fully to your host PC before pulling the battery, so your data exists somewhere outside volatile RAM.

My MobilePro P300 wireless sync keeps dropping after fitting the new battery — is the radio faulty?

The P300's wireless radio is voltage-sensitive and draws a sharp current spike when transmitting. If the new battery hasn't been fully charged yet, that spike causes a brief voltage sag that interrupts the radio stack and drops the sync session. Charge the battery to a full 4.2V before attempting a wireless sync — most drop issues at this stage resolve once the cell is at capacity.

The MobilePro P300 shows a charging indicator but the battery percentage never climbs past about 10% — what's wrong?

This usually means the cell arrived in deep storage discharge, below the threshold where the charger applies full current. The P300's charging circuit starts with a low-current pre-charge phase to bring a depleted cell back up safely, and this phase can look like the device is stuck. Leave it on charge uninterrupted for 60–90 minutes — once the cell voltage recovers past roughly 3.0V, the charger steps up to full current and the percentage will begin climbing normally.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.