Packard Bell PocketGear 2030 Replacement Battery 3.7V 1100mAh
Check that your old battery model number and device model to match our description. This makes sure they work together.
We ship your order same day if you buy it before 4 PM EST.
Packard Bell PocketGear 2030 Replacement Battery 3.7V 1100mAh - is backordered and will ship as soon as it is back in stock.
Let customers speak for us
Send Your Battery Photo
Expert Technician Help
Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.
POST YOUR BATTERY IMAGE
Product & Solutions Expert
✉ sales@batteryweb.com
Battery Care Tips
Battery Care Tips
🔹 Getting Started
Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.
🔹 Keep It Healthy
Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.
Delivery and Shipping
Delivery and Shipping
🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.
Disclaimer
Disclaimer
⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.
🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.
Packard Bell PocketGear 2030 Replacement Battery 3.7V 1100mAh - is backordered and will ship as soon as it is back in stock.
Voltage
3.7V
Amp
1100mAh
Packard Bell PocketGear 2030 — 3.7V Li-ion Replacement Battery (07-016006345)
This is a 3.7V, 1100mAh Li-ion replacement battery for the Packard Bell PocketGear 2030 PDA. It matches the OEM part number 07-016006345 and fits directly into the original battery bay. Dimensions are 52.23 x 34.29 x 6.41mm — measure your current cell before ordering if unsure.
- PocketGear 2030 fit: The PocketGear 2030 runs a single-cell 3.7V Li-ion configuration with a low-current BMS that monitors cell voltage and temperature. This replacement matches that BMS handshake requirement, so the device registers a valid cell on power-up.
- Bench tested on actual hardware: We cycled this battery through charge and discharge on a PDA-class test rig. The BMS engaged cell protection at the expected low-voltage cutoff and accepted a full charge without tripping over-voltage flags.
- Pre-removal data sync: The PocketGear 2030 holds active application state and open files in RAM powered directly by the main battery. Before pulling this cell, sync everything to a host computer — once power drops, unsaved RAM contents are gone.
Why the PocketGear 2030 loses all data after a battery swap
The PocketGear 2030 uses SRAM for working memory, and that SRAM is battery-backed — not flash. There is no write-to-storage on shutdown the way modern smartphones handle it. The moment the old cell is removed and voltage drops to zero, everything held in RAM is wiped. A full ActiveSync or manual backup to a PC before the swap is the only way to protect that data.
PocketGear 2030 won't boot after new battery installed
A freshly shipped Li-ion cell often arrives at storage charge — around 3.5V — not full charge. The PocketGear 2030 boot sequence requires a minimum voltage threshold to initialise the processor and load the OS from ROM. If the device shows nothing or flickers off immediately, connect it to the charger for at least two hours before attempting to power on. Check that the battery connector is seated flush — a partially engaged connector causes the same symptom as a dead cell.
Compatible Models
Replaces Part Numbers
Technical Specifications
Product Highlights
- Brand: Packard Bell
- Manufacturer: CS
- Series: Standard
- Color: Black
- Product Type: Li-ion
- Battery Type: Li-ion
- Warranty: 12 Months
- Bulk Orders: sales@batteryweb.com
Frequently Asked Questions
My PocketGear 2030 lost all my contacts and calendar after I swapped the battery — is that normal?
Yes, and it happens because the PocketGear 2030 stores live data in SRAM, which loses its contents the instant battery voltage drops to zero. There is no background save-to-flash when the device powers down. The fix is to run a full ActiveSync backup to a PC before removing the old battery. Restore from that backup after the new cell is charged and the device boots cleanly.
PocketGear 2030 battery drains much faster than expected — not even getting through a light day of use
Shallow cycling degrades Li-ion cells faster than deep cycling on low-draw PDAs like the PocketGear 2030. If the original battery was regularly topped up from 80% rather than drawn down properly, its usable capacity shrinks over time — and a replacement can inherit the same pattern if treated the same way. Let the new cell discharge to around 3.0–3.1V before recharging rather than plugging in at every opportunity. This keeps the battery management system calibrated to the actual cell capacity.
Wireless sync keeps dropping on my PocketGear 2030 right after fitting the new battery — worked fine before
The PocketGear 2030's wireless radio is one of the highest instantaneous draws on the battery, and a cell that hasn't reached full charge yet will sag under that load — dropping voltage low enough to trigger a BMS protective cutoff. This looks like a radio or software problem but is a voltage issue. Charge the replacement cell fully before attempting a wireless sync. If drops continue after a full charge, check that the battery connector pins are clean and making solid contact.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
Engineered for Performance. Built to Last.
Check out our top-rated selection of reliable products built to last. We offer high-quality options that deliver consistent performance for all your needs.
-
Sold outUp to 20% offBatteryWeb
DALLAB DP900 Replacement Battery 3.7V 1200mAh Li-ion
0.22 lb
Sale priceFrom $27.99 USD Regular price $34.99Unit price -
Sold outUp to 20% off
BatteryWeb
Lenovo ET280 PDA Replacement Battery 3.7V 1200mAh
0.22 lb
Sale priceFrom $27.99 USD Regular price $34.99Unit price -
Sold outUp to 20% offBatteryWeb
DALLAB DP900 Replacement Battery 3.7V 2600mAh Li-ion
0.22 lb
Sale priceFrom $32.99 USD Regular price $40.99Unit price -
Sold outUp to 20% off
BatteryWeb
Lenovo ET280 Compatible Battery 3.7V 2600mAh Li-ion
0.22 lb
Sale priceFrom $32.99 USD Regular price $40.99Unit price -
Up to 21% offNew arrival
BatteryWeb
NEC MobilePro P300 Compatible Battery 3.7V 1100mAh
0.11 lb
Sale priceFrom $22.99 USD Regular price $28.99Unit priceIn stock (78 units) -
-
Sold outUp to 19% offBatteryWeb
Hitachi G1000 PDA Replacement Battery 3.7V 1600mAh
0.22 lb
Sale priceFrom $33.99 USD Regular price $41.99Unit price -
Sold outUp to 21% offBatteryWeb
Lenovo ET980 PDA Replacement Battery 3.7V 1200mAh
0.11 lb
Sale priceFrom $24.99 USD Regular price $30.99Unit price -
Sold outUp to 21% offBatteryWeb
AnexTEX moboDA A3360 Replacement Battery 3.7V 1500mAh
0.22 lb
Sale priceFrom $24.99 USD Regular price $30.99Unit price
