Welcome to our store. Your trusted source for batteries and power solutions. Learn more

For support or quotes: sales@batteryweb.com

WELCOME5
BatteryWeb

Vileda Quick & Clean 3.7V 3400mAh Replacement Battery

Up to 21% off
New arrival
Sale priceFrom $26.99 USD Regular price $33.99
Shipping calculated at checkout.
Fits Vileda Quick & Clean and VI409842 models, replaces OEM part number 8654396211.
3.7V 3400mAh lithium-ion cell delivers full motor power to handheld vacuum cleaner without voltage sag.
Connector slides straight into dock contact plate; locking tab seats flush when fully inserted.
We ran full discharge cycles on the Quick & Clean platform; BMS held stable until cutoff, no mid-cycle trips.
Do not leave this battery on the charging dock continuously — trickle charge cycles degrade capacity faster than charge-and-remove cycles.
Delivery time

This product ships directly from our Manufacturer’s Warehouse and is usually delivered within 5 – 8 business days to your doorstep.

Discount: As a thank you for your patience, enjoy 5% off on your order
WECARE5

Visa Mastercard American Express PayPal Apple Pay Google Pay Shop Pay Discover Klarna Afterpay Stripe

Check that your old battery model number and device model to match our description. This makes sure they work together.


We ship your order same day if you buy it before 4 PM EST.

Warranty

Send Your Battery Photo

Expert Technician Help

Snap a photo or video of your battery and send it to us. We'll identify the exact replacement—fast and hassle-free. Our team has helped thousands of customers find the right battery quickly and easily.

POST YOUR BATTERY IMAGE
Product & Solutions Expert

Product & Solutions Expert

✉ sales@batteryweb.com

🔹 10+ Years Battery Experience 🔹 Fast & Accurate Identification

Battery Care Tips

🔹 Getting Started

Charge your new battery fully before you use it for the first time. Over the next few charge cycles, run your device down to around 20% before you recharge—this helps the battery perform its best. After that, charge whenever you need to.

🔹 Keep It Healthy

Avoid letting your battery completely drain or staying plugged in constantly. Both extremes wear it out faster. Store the battery in a cool, dry place when you're not using it, since heat damages batteries quickly.

Delivery and Shipping

🔹 Most orders ship the next day, and we use FedEx, UPS, Purolator and other carriers to get them to you. Lithium batteries have to ship by ground only, not air or USPS. Make sure your address is right before you order, because if we have to send it back, you pay for shipping again.

Disclaimer

⚠️ Disclaimer: All product names, trademarks, and registered trademarks belong to their respective owners.

🔹 We use these names, brands, or model numbers only for identification and compatibility purposes.


Voltage

3.7V

Amp

3400mAh

Vileda Quick & Clean — 3.7V Li-ion Replacement Battery (8654396211)

This is a 3.7V 3400mAh Li-ion battery for the Vileda Quick & Clean cordless handheld vacuum. It fits the Quick & Clean and VI409842 models. When the original cell loses charge capacity or stops holding a charge entirely, this replacement restores the vacuum to full working order.

  • Quick & Clean and VI409842 compatibility: Both models run the same 3.7V motor rail and share the 8654396211 cell format. The connector type, BMS handshake, and physical envelope are identical across this range, so one cell covers both.
  • Bench tested on actual hardware: We ran this cell through full charge and discharge cycles on the Quick & Clean platform. The BMS responded correctly to both low-voltage cutoff and charge termination — no false trips or charge refusal on the stock charger.
  • Dock charging behaviour on this model: The Quick & Clean dock does not cut power when the cell reaches full charge. Leaving the vacuum on the dock permanently causes trickle charge heat buildup inside the cell. Charge to full, then remove it from the dock.

Suction dropping before the battery indicator reaches low

This happens when the motor draws more current than the BMS expects under load. A partially blocked filter increases resistance at the fan, which spikes current draw and causes the BMS to reduce output voltage to protect the cell. The result is noticeable suction loss even with charge remaining. Clean or replace the filter first — if suction recovers, the cell is not the cause.

Motor cutting out mid-clean and then recovering after a pause

This is a BMS overcurrent trip, not a dead battery. When suction is sustained against a blockage or heavily loaded carpet, current spikes past the BMS protection threshold and the circuit opens. The motor stops, the BMS resets after a few seconds, and it starts again. Clear any blockage, check the filter, and confirm the cell voltage reads above 3.5V on a multimeter before assuming the battery needs replacing.

Compatible Models

Quick & Clean VI409842

Replaces Part Numbers

8654396211

Technical Specifications

Voltage3.7V
Amp Hours3400mAh
Capacity3400mAh
Rate12.58Wh
Net Weight52.8g /1.86 oz
Gross Weight77.8g /2.74 oz
Approximate Weight77.8g /2.74 oz
Dimension 66.40 x 21.00 x 18.80mm

Product Highlights

  • Brand: Vileda
  • Manufacturer: CS
  • Series: Standard
  • Color: Black
  • Product Type: Li-ion
  • Battery Type: Li-ion
  • Warranty: 12 Months
  • Bulk Orders: sales@batteryweb.com

Frequently Asked Questions

My Vileda Quick & Clean loses suction well before the battery light comes on — is the new battery going to fix this?

Not necessarily. Suction loss before the low-battery indicator usually points to a blocked filter forcing the motor to work harder, which spikes current draw and drops output voltage under load. We saw this exact behaviour on the bench — swapping the cell made no difference until the filter was cleared. Clean or replace the filter first; if suction holds after that, the battery is the culprit.

The Quick & Clean keeps cutting out after a few seconds of use and then starts again — what's causing that?

That's a BMS overcurrent trip. When the motor pulls more current than the protection circuit allows — usually from a partial blockage or a clogged filter — the BMS opens the circuit and shuts the motor off. It resets itself after a short pause, which is why it restarts. Clear any blockage, clean the filter, then check that resting cell voltage is above 3.5V before concluding the battery is faulty.

I've had my Vileda Quick & Clean on the charging dock every day and the battery seems to have gotten worse over time — is that normal?

Yes, and it's one of the most common causes of capacity fade on this model. The Quick & Clean dock does not stop delivering charge once the cell is full, so the cell sits in a warm, trickle-charged state for hours at a time. That degrades lithium-ion cells faster than regular charge-discharge cycling. Charge the replacement fully, then remove it from the dock — only return it when the battery is depleted.

Payment & Security

Payment methods

  • American Express
  • Apple Pay
  • Diners Club
  • Discover
  • Google Pay
  • Mastercard
  • PayPal
  • Shop Pay
  • Visa

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.